Store
More...
NOTE: The store will not be open and active until the KickStarter campaign is over and successfully funded. For more about the KickStarter project go HERE.
Basic Get Started Kit – A complete kit of Robot DHQ components you need to get started designing and building a humanoid robot on the Robot DHQ foundation. Click the image to the left for details. You will quickly get up to speed because all the components are soldered in for you. No soldering needed!
$ 100.00
Standard 10-conductor ribbon cable with IDC connectors installed. This is a "straight-through" cable. Pin 1 of connector 1 is connected to pin 1 of connector 2, etc. All connectors and board use this same cable. Note that "cross over cables" are not used in the Robot DHQs design.
Quantity Discount available
$ 6.00
Developer Kit
$ 110.00
Economy Kit – Everything in the Basic Get Started Kit plus 2 Breadboard Adapter Boards. But, many items are not soldered in place. This saves us time and saves you money! At the same time you will gain the flexibility to more easily create your application using Robot DHQ components! Click the image to the left for details.
$ 90.00
All LED boards come with the 10-pin socket installed in the correct orientation according to the Robot DHQ design. In the partially assembled version, the eight LEDs and eight current limiting resistors are included for the maker to install as needed. The current limiting resistors may be installed as either pull up or pull down as needed. Using this board the maker can easily wire other components or circuits in place of one or more LEDs as desired. In one purchase option we install the LEDs and install the resistors as "pull up" resistors. In the second option we install the LEDs and install the resistors as "pull down" resistors.
$ 6.00
Super Developer Kit
$ 0.00
Super Economy Kit
Super Econoomy Kit
$ 115.00
Super User Kit
Super User Kit
$ 150.00
An Arduino Nano connected to three Robot DHQ adapter boards